Heating Elements Widely Using High Quality Electric Aluminum Foil Heater

Product Detail

1.Domestic appliances, medical

2.Ceiling / Wall Panels

3.Defrost / Refrigeration

4.Incubators

5.Evaporators

6.Battery warmmers

7.Food warmmers

8.Laboratory warmmers

9.Hermetic compressors heating

10.Freeze protection of plate heat exchangers 



The heating element can be PVC or silicone insulation to the heater. Placed in the heater or hot-melt in aluminum foil between two single-layer aluminum foil. The foil heater with a self-adhesive bottom layer to facilitate quick and easy installation in the area of the need to maintain the temperature. Area, even heating, easy to use, widely used in refrigerators, freezers, auxiliary heating and defrosting, thawing, and other electric appliances.



1.Insulation resistance:500MO

2.Leakage current to be 0.5ma max While energized at rated voltage

3.Power tolerance:+5%,-10%

4.Voltage:12V-440V

5.Heating resistance wire is Cr20Ni80 or as custom'es requirement

		RLPV	RLPG
Electrical insulation		105?PVC	Silicon rubber
Dimension		Any dimension on request
Voltage		Any voltage on request
Output		Up to 2.5KW/m2
Tolerances		=±5% on resistance
Insulation resistance in normal temperature		=100 MO
Dielectric strength in normal temperature		1800V 2S, No flashover and break down
Leakage current in working temperature		=0.02 mA/m
Connect strength	Heater wire and lead wire	=36N 1min
	Lead wire and terminal	=58.8N 1min
	Heater and Al-foil	400g/ 1min






We can manufacture the Aluminum Foil heater according to your require. Here is some picture for our products.









Remark: Generally Speaking, we will manufacture it according to your require. If you have sample or drawing, the products can be customized